Heavy-Duty Utility Pedestals for RV Parks and Campgrounds
Built to withstand heavy daily use and extreme weather. Jiya manufactures robust, code-compliant power pedestals, integrated water posts, and EV chargers designed to simplify on-site installation and minimize long-term campground maintenance.
- ANSI / NFPA 1194 Compliant
- Standard NEMA 14-50R, TT-30R & 5-20R Sockets
- Heavy-Gauge Galvanized Steel / SUS 304
- Pre-Wired Internals for Rapid Setup
Competitive Factory Pricing
Reliable Lead Times
OEM/ODM Customization Support
- All-in-One Configuration: We integrate high-amperage NEMA 14-50R (50A), TT-30R (30A), and 5-20R (20A GFCI) receptacles into a single pillar. This allows your campground to host any camper size—from large Class A motorhomes to small travel trailers—without complex adapters.
- Individual Circuit Protection: Every socket is protected by its own dedicated thermal-magnetic circuit breaker, housed behind a secure weatherproof door, preventing localized overloads from causing park-wide blackouts.
- Physical Compartmentalization: Water plumbing is routed through a sealed lower chamber, completely isolated from the live electrical chamber above. This prevents short circuits during winter pipe freezing or high-pressure washing.
- Lead-Free Plumbing: Equipped with heavy-duty, lead-free brass or stainless steel valves with integrated backflow preventers, keeping your campground drinking water system safe and uncontaminated.
- Factory Pre-Wired: All internal wiring, bus bars, and receptacles are pre-assembled and tested at our factory. Installation contractors only need to bolt down the base and connect the main feed, cutting on-site electrical labor costs by up to 50%.
- Lockable Anti-Theft Doors: Every pedestal is equipped with padlock-compatible latches. Camp managers can lock unused pedestals to prevent power theft by non-paying visitors.
RV Power Pedestals
01
RV Power Pedestals
Heavy-duty distribution pillars featuring standard 50A, 30A, and 20A NEMA receptacles with individual circuit breakers and LED lighting. Engineered to comply with ANSI/NFPA 1194 safety standards.
02
RV Water and Electric
Space-saving, dual-utility pedestals combining high-amperage power outlets with eco-friendly, lead-free water hookups. Features strict physical compartmentalization for ultimate outdoor safety.
03
EV Charging Stations
Smart 7kW AC charging stations with offline RFID card access. Designed to allow campground owners to offer high-speed charging to premium EV drivers and prevent unauthorized power theft.
Our Technical Integrity
- IK10 Impact & Crush Resistance: Formed from thick galvanized steel or marine-grade stainless steel with a bending tolerance of <0.2%, our pedestals resist accidental vehicle bumps, lawnmower impacts, and harsh outdoor physical wear.
- Thermosetting Powder Coating (10+ Years Anti-Rust): Every housing undergoes a multi-stage chemical pretreatment and high-temperature powder coating, providing excellent UV resistance to prevent yellowing, peeling, and corrosion in rain or snow.
- Pre-Wired for Rapid On-Site Setup: Delivered fully assembled internally. Your electricians only need to wire the incoming main line to our heavy-duty terminal blocks, saving hours of expensive field labor.
- Vandal-Resistant & Lockable: Every pedestal features padlock-compatible latch doors. Operators can easily lock out unused pedestals, protecting breakers and outlets from unauthorized use, weather, and tampering.
FAQ
Our standard RV pedestals are equipped with three distinct outlets: a 50 Amp (NEMA 14-50R) for large Class A/C motorhomes, a 30 Amp (NEMA TT-30R) for travel trailers, and a 20 Amp GFCI (NEMA 5-20R) for basic outdoor appliances. This all-in-one configuration allows your campground to accommodate any visitor without requiring adapters.
Yes. Our RV pedestals are designed and engineered to strictly comply with ANSI/NFPA 1194 (Standard for Recreational Vehicle Parks and Campgrounds) and NEC Article 551 electrical codes. This ensures your project will pass local electrical inspections smoothly.
Yes. Every pedestal is designed with a lockable door latch that accepts standard padlocks. When a campsite is unoccupied, the camp manager can lock the door to prevent non-paying visitors from accessing the circuit breakers, outlets, or water valves.
Normally, electricians have to spend 1 to 2 hours per pedestal wiring up individual breakers, bus bars, and sockets on-site. Jiya pedestals are fully pre-wired, pre-assembled, and tested in our factory. On-site contractors only need to mount the pedestal to the concrete pad and feed the main line into our heavy-duty terminal block, reducing electrical labor time by up to 50%.
Absolutely. We use high-precision fiber laser engraving. We can etch your campground’s logo, custom warnings, and specific campsite numbers (e.g., “Site 01”, “Site 02”) permanently into the metal housing. This ensures the numbering never peels, fades, or rusts, surviving decades of extreme outdoor sun and weather.
Our RV water and electric pedestals are designed with manual drain valves. Before freezing winter weather arrives, camp managers can shut off the water source and completely drain the residual water from the column. Additionally, the internal plumbing pipes are wrapped in closed-cell thermal insulation to prevent winter freeze-cracking.
Request a Quote
Fill out the form below and our power pedestal specialists will get back to you shortly.